Skip navigation

COATED COATER BLADES / CREPING BLADES

In order to increase the service life of coater blades and creping doctors, their blade tips are coated with a wear-protection layer. Ceramic layers and metal-ceramic composites (cermets) are used for this.

Different layer and wear characteristics, such as hardness and material removal, are required depending on the customer’s specific application. Accordingly, our CERADIA product range offers a broad spectrum of possible coating variants so that our application technicians are able to develop an ideally-tailored product for each individual customer.

COATER BLADE CERADIA® 100

Stiff Blade, Bent Blade or Double-angle Blade with ceramic tip

ADVANTAGES
PRIMARY MATERIAL
Carbon Steel, Stainless Steel
COATING
Ceramic coating based on AIO2
COATING COLOURlight grey
STANDARD DIMENSIONS*
THICKNESS mm (inch)
WIDTH mm (inch)
0.305 (0.012)
Deliverable in all width between 76.2 (3) and 100 (4)
0.381 (0.015)
0.457 (0.018)
0.508 (0.020)
* Other widths and thicknesses available on request
KEY FEATURES
Continuous length to individual specification
Hardened, tempered, blue-grey, straight adjusted
Individual bevel according customer requirement
Straightness tolerance max. variation 0.05 mm over 1000 mm
SUITABLE HOLDERS
Ready to install for all holder systems with or without punched tabs
Clouth Sprenger GmbH

Johann-Clouth-Str. 1–5
D - 42499 Hückeswagen
Phone: +49 2192 853-500
Fax: +49 2192 853-333
E-Mail: salesclouthcom