In order to increase the service life of coater blades and creping doctors, their blade tips are coated with a wear-protection layer. Ceramic layers and metal-ceramic composites (cermets) are used for this.
Different layer and wear characteristics, such as hardness and material removal, are required depending on the customer’s specific application. Accordingly, our CERADIA product range offers a broad spectrum of possible coating types so that our application technicians are able to develop an ideally-tailored product for each individual customer.
CREPING BLADE CERADIA® 400+
Carbon Steel with high wear resistant ceramic tip
ADVANTAGES | |
---|---|
PRIMARY MATERIAL |
Carbon Steel, Stainless Steel |
COATING |
Ceramic coating based on Cr2O3 |
COATING COLOUR | dark grey |
STANDARD DIMENSIONS* | |
---|---|
THICKNESS mm (inch) |
WIDTH mm (inch) |
0,6 (0,024) |
90 (3.55), 100 (4), 110 (4.33), 116 (4.57), 120 (4.75) |
0,889 (0,035) |
|
1 (0,039) |
|
1,25 (0,050) | |
Crepe angle: -20° to +40° * Other widths and thicknesses available on request |
KEY FEATURES | |
---|---|
Improved wear resistance with the same product quality |
|
Continuous length to individual specification |
|
Tempered, plain ground and straight adjusted |
|
Individual bevel according customer requirement |
|
Straightness tolerance max. variation 0.2 mm over 1000 mm |
SUITABLE HOLDERS | |
---|---|
Ready to install for all holder systems |