In order to increase the service life of coater blades and creping doctors, their blade tips are coated with a wear-protection layer. Ceramic layers and metal-ceramic composites (cermets) are used for this.
Different layer and wear characteristics, such as hardness and material removal, are required depending on the customer’s specific application. Accordingly, our CERADIA product range offers a broad spectrum of possible coating types so that our application technicians are able to develop an ideally-tailored product for each individual customer.
COATER BLADE CERADIA® CXF+
Stiff Blade, Bent Blade or Double-angle Blade with high wear resistance carbide tip
ADVANTAGES | |
---|---|
PRIMARY MATERIAL |
Carbon Steel, Stainless Steel |
COATING |
Carbide coating based on Tungsten |
COATING COLOUR | silver |
STANDARD DIMENSIONS* | |
---|---|
THICKNESS mm (inch) |
WIDTH mm (inch) |
0.381 (0.015) |
Deliverable in all width between 76.2 (3) and 100 (4) |
0.457 (0.018) |
|
0.508 (0.020) |
|
0.635 (0.025) | |
* Other widths and thicknesses available on request |
KEY FEATURES | |
---|---|
Optimised product design for reducing occurrence of streaks & micro-lines |
|
Improved wear resistance with the same product quality |
|
Continuous length to individual specification |
|
Hardened, tempered, blue-polished, straight adjustet |
|
Individual angle on customer requirement |
|
Straightness tolerance max. 0.05 mm over 1000 mm |
SUITABLE HOLDERS | |
---|---|
Ready to install for all holder systems with or without punched tabs |