In order to increase the service life of coater blades and creping doctors, their blade tips are coated with a wear-protection layer. Ceramic layers and metal-ceramic composites (cermets) are used for this.
Different layer and wear characteristics, such as hardness and material removal, are required depending on the customer’s specific application. Accordingly, our CERADIA product range offers a broad spectrum of possible coating types so that our application technicians are able to develop an ideally-tailored product for each individual customer.
CLEANING BLADE CERADIA® OPTIMUS
Carbon Steel with wear resistance ceramic tip
ADVANTAGES | |
---|---|
PRIMARY MATERIAL |
Carbon Steel, Stainless Steel |
COATING |
Ceramic coating based on AIO2 |
COATING COLOUR | light grey |
STANDARD DIMENSIONS* | |
---|---|
THICKNESS mm (inch) |
WIDTH mm (inch) |
0.6 (0.024) |
90 (3.55), 100 (4), 110 (4.33), 116 (4.57), 120 (4.75) |
0.889 (0.035) |
|
1 (0.039) |
|
1.25 (0.050) | |
Crepe angle: -20° to +40° * Other widths and thicknesses available on request |
KEY FEATURES | |
---|---|
Continuous length to individual specification |
|
Tempered, plain ground and straight adjusted |
|
Individual bevel according customer requirement |
|
Straightness tolerance max. variation 0.2 mm over 1000 mm |
Special features | |
---|---|
Ceramic technology specially developed for use on Yankee cylinders |
|
Gentle cleaning with consistent quality values |
|
Reproducible, improved quality of the coating |
|
Run-time: up to 72 hours |
|
Cleaning needs: 1x/24 hours |
|
Extended operational performance for the crepe blade |
|
Increased efficiency and highest possible system availability |
SUITABLE HOLDERS | |
---|---|
Ready to install for all holder systems |